Original Third-Person Helmet Mount Kit For DJI Osmo 360, Helmet Mount Kit

1. The curved base fits snugly against the helmet and adheres firmly to stay in place. Paired with a high-strength carbon fiber straight rod, it enables a distinctive third-person tracking perspective.
2. Compatibility: Osmo 360
3. Tips:
--1. When attaching the base, press firmly for more than 30 seconds, and let it sit for 30 minutes to ensure adhesion.
--2. This product is intended for one-time use on clean, curved surfaces only. If the surface is not sufficiently smooth, apply the included adhesive pad first, then attach the base.
--3. The ideal application temperature is between -10°C and 40°C (14° F to 104° F).
--4. After wearing, be sure to tighten the locking nut to prevent shaking or displacement due to significant bumps during movement.
--5. While capturing 360° shots, The bottom of the camera facing the helmet may be closer than the minimum required stitching distance. Adjust the angle and composition to avoid close-range stitching flaws at the bottom.

Specifications:
1. Osmo Curved Adhesive Base Max:
Dimensions: Approx. 50 × 55 × 24 mm (L × W × H)
Weight: Approx. 17 g

2. Hex Key:
Dimensions: Approx. 53 × 97 × 16 mm (L × W × H)
Weight: Approx. 8 g

3. 28cm Carbon Fiber Straight Rod:
Dimensions: Approx. 291 × 17 × 23 mm (L × W × H)
Weight: Approx. 45 g

4. Osmo Locking Screw:
Dimensions: Approx. 13.3 × 23 × 55.6 mm (L × W × H)
Weight: Approx. 12 g

5. 1/4 inch Thread to Two-Prong Adapter:
Dimensions: Approx. 32×18×18 mm (L×W×H)
Weight: Approx. 9 g

6. Osmo Action Quick-Release Adapter Mount:
Dimensions: Approx. 41×21×34 mm (L×W×H)
Weight: 16 g

In The Box:
Osmo Curved Adhesive Base Max × 1
28 cm Carbon Fiber Straight Rod × 1
1/4 inch Thread to Dual Prong Adapter × 1
Osmo Action Quick-Release Adapter Mount × 1
Osmo Locking Screw × 1
Screw Locking Wrench × 1
Hex Key × 1