Leather Hand Seam Sewing Machine DIY Leather Carving Stitching Tool Device, A, B

1. The spanner taper needle can be stored in the inner groove of the handle after use
2. Material: beech + steel
3. Application: it is used for sewing tools in leather carving
4. Size: hand sewing machine 130mm long, 32mm diameter
5. Weight: about 120g

Packing list:
-1 x hand sewing machine
-1 x black over wax line
-1 x small screwdriver
-1 x 54 mm long taper needle
-1 x 45 mm short taper needle
-1 x wrench with tight needle
-1 x spare spool

Installation tutorial 1:
1. Take the spool off with a screwdriver
2. Run the wire through the hole
3. Install the needle and thread the wax thread through the hole
4. Install the spool in place, put on the cap, tighten with a wrench
5. Installation complete

Installation tutorial 2:
1. Remove the silver cone cover
2. Take out a needle
3. Put It on a needle
4. The winding device winds the wire
5. Through the taper shank
6. Thread from screw side
7. Cover the cone
8. Through the needle
9. Installation complete